Редактирование: Mindset (раздел)

=== Packet Structure ===
Packets are sent as an asynchronous serial stream of bytes. e transport medium may be UART, serial

COM, USB, bluetooth, 􀃫le, or any other mechanism which can stream bytes.

Each Packet begins with its Header, followed by its Data Payload, and ends with the Payload's Checksum

Byte, as follows:
{| class="wikitable"
|+Структура пакета данных
!первый байт синхронизации
!второй байт синхронизации
!длина пакета
!тело ответа
!контрольная сумма
|-
| colspan="3" |Заголовок пакета ^^^
|Данные ^^^
|Контрольная сумма ^^^
|}
e [PAYLOAD…] section is allowed to be up to 169 bytes long, while each of [SYNC], [PLENGTH],

and [CHKSUM] are a single byte each. is means that a complete, valid Packet is a minimum of 4

bytes long (possible if the Data Payload is zero bytes long, i.e. empty) and a maximum of 173 bytes

long (possible if the Data Payload is the maximum 169 bytes long).

A procedure for properly parsing inkGear Packets is given below in Step-By-Step Guide to Parsing

a Packet.